CA8000DX Bogen Stereo Power Amplifier 940W, 120V with DSP

Apogee's CA8000D and CA8000DX amplifiers offer cost-effective performance for permanent installations and commercial sound. Suitable for high-end installations, the CA8000DX offers a state-of-the-art built-in DSP module for extensive and comprehensive signal processing including factory loudspeaker presets, turning the amplifier into a complete audio solution. The DSP module is PC remote controlled by intuitive System Control Manager software.

Specifications

• Power 20 Hz - 20 kHz 1% THD
  • 2 ohms Stereo - 1420WRMS
  • 4 ohms Stereo - 940 WRMS
  • 8 ohms Stereo - 550 WRMS
  • 4 ohms Bridged - 2840 WRMS
  • 8 ohms Bridged - 1880 WRMS
• Peak Power 2 ohms/1 kHz/Stereo - 2.95kW
• Imd. Dist. 50 Hz & 7 kHz, 4:1 - ‹ 0.08%
• Slew Rate - ± 80V/μs
• Amplifier Gain - 36dB
• S+N/N 20 Hz-20 kHz @ 1 W/4 ohms - > 85dB
• Channel Crosstalk @ 1 kHz - > 75dB
• Power Consumption (Max. Out) - 3115VA
• Pink Noise, 1/8 power @ 4Ω - 1426VA (2642 BTU/hr)
• Pink Noise, 1/3 power @ 4Ω - 2160VA (3121 BTU/hr)
• Frequency Response (-1 dB) - 6Hz-50 kHz
• THD+Noise @ 1 kHz Full PWR - ‹0.07%
• Damping Factor 1 kHz @ 8 ohms - > 300
• Input Connectors - XLR Balanced
• Output Connectors - Speakon
• Input CMR/Ref. Max. PWR - > 60dB @ 1kHz
• Input Sensitivity / Impedance - 0dBV/ >20k ohms
• Signal Present Indicator - -40dB
• Clip Indicators - -1.5dB before clip
• Anticlip Limiter - 1% (factory preset) or 5% THD+N
• Dimensions - 19"W x 3.5"H x 18.5"D; (482.6mm) W x (88mm) H x (470mm) D; 2 EIU rack spaces
• Weight - 50 lb./22.7kg

CA8000DX Specifications PDF