The cart is empty.
Dealers. First. Always.
DWG

500756-RX Muxlab 3G-SDI over IP Receiver with PoE

SKU: 500756-RX
  • Supports up to 1080p resolutions
  • Motion JPEG compression with very low latency
  • Supports 100’s of Transmitters and Receivers, depending on network bandwidth
  • LAN Switch based configurations support point-to-point, point-to-multipoint and multipoint-to-multipoint
  • Extend transmission up to 330ft (100m)over an IP Network(when a LAN Switchisused)
  • Extend transmission up to 390ft (120m)in a point-to-point configuration (when aLAN switch is not used)
  • Supports RS232 and one way IRtransmissionfor remote controlof end devices
  • PoE powered
More details...
MSRP Price: $550.00
Online Price: $376.00
Save to my Wish List
Product Details

The 3G-SDI / RS232 over IP Extender Kit with PoE allows SDI equipment to be connected up to 330ft(100m)@ 1080p through an IP network. Point-to-Multipoint, and Multipoint-to-Multipoint is possible by connecting several Transmitters and Receiversto the same network. Supports 100’s of Transmitters and Receivers, depending on network bandwidth.


Specifications


  • Environment - 3G-SDI
  • Devices - Camera, monitor and other broadcast equipment supporting 3G-SDI
  • Transmission - Transparent to the user
  • Video Bandwidth - 2.94 Gbps
  • Signals - 3G-SDI protocol
  • Connectors
    • One (1) 3G-SDI (BNC)
    • One (1) RJ45S for Cat5e/6 unshielded or shielded twisted pair
    • One (1) 3.5mm jack for IR emitter/sensor
    • One (1) DB9 Serial Port Connector
    • Four (4) DIP Switches for device ID addressing
  • Maximum Distance (Based on a maximum length of 6.6ft (2m) of HDMI cable per end)
    • Cat5e/6 : 330ft (100m) with LAN switch
    • Cat5e/6 : 400ft (120m) without LAN switch (point to point only)
  • Latency - One (1) Frame
  • Compression - Motion JPEG
  • Network Bandwidth - 60Mbps
  • RJ45 Pin Configuration (Reverse Polarity Sensitive. Use EIA/TIA 568A or 586B straight-through wiring)
    • RJ45 Link
    • Pin 1 (R)
    • Pin 2 (T)
    • Pin 3 (R)
    • Pin 4 (R)
    • Pin 5 (T)
    • Pin 6 (T)
    • Pin 7 (R)
    • Pin 8 (T)
  • IR Frequency - 38KHz to 56KHz
  • Network Requirement - 100BaseT for Point to Point; 1000BaseT for other configurations
  • Cable - One (1) Cat 5e/6 or better twisted pair cable required
  • Power Supply - This device supports PoE (PD), an external power supply is not included. It is intended to be powered via a PoE (PSE) Ethernet Switch. If required, an optional power supply (500993) may be purchased separately
  • PoE - IEEE 802.3af
  • Power Consumption
    • Transmitter : 2.9Watt
    • Receiver : 1.8Watt
  • Temperature
    • Operating : 0° to 40°C
    • Storage : -20° to 85°C
    • Humidity : Up to 95% non-condensing
  • Enclosure - Metal black
  • Dimensions - 4.4” x 3.0” x 1.0” (11.2cm x 7.6cmx 2.5cm)
  • Weight - 1.1 lbs (0.5kg)
  • Compliance
    • Regulatory : FCC, CE, RoHS
    • Flammability : 94V0
  • Warranty - 2 years
  • Order Information - 500756 RX - 3G-SDI / RS232 Over IP Extender RXwith PoE (UPC: 627699807569)
  • Accessories
    • 500905 3-Port Rackmount Transceiver Chassis
    • 500920 16-Port Rackmount Transceiver Chassis
    • 500917 Wall Mount Transceiver Bracket Kit
    • 500998 IR Emitter, and 500994 IR Sensor
    • 500993 Univ. Locking Power Supply 5VDC/2.6AUS/UK/EU Blade

500756-RX Specifications PDF

500756-RX Manual


Product Reviews

Write your own review

 

Rate this product:


DWG - 800 Shames Drive , Westbury , NY 11590 , USA - 516-933-4900
Connect with us on Social Media   Facebook   Instagram   Twitter   Linked In