STRIKEIT4 Altronix Low Current Locking Device Power Controller

Altronix StrikeIt4 will operate up to two (2) low current lock hardware devices simultaneously. It is designed to operate motorized electric latch retraction exit devices, electric strikes, mag-locks, electric mortise and cylindrical locksets, etc. Each lock output has an adjustable re-lock delay timer. It will control a pair of doors simultaneously, or independently control two single door leafs.

Specifications

Input

• Voltage
  • 1115VAC, 60Hz, 2.5A or 230VAC, 50Hz, 1.5A
  • Two (2) Normally Open (N.O.) trigger inputs
  • FACP Normally Closed (N.C.) input
  • Two normally open ADA inputs for special mode of interfacing with automatic door operators
• Fusing - Input fuse rating: 3A

Outputs

• Power options
  • Two (2) 19.8VDC-26.4VDC rated individually controlled lock outputs configurable for fail-secure or fail-safe electronic locking hardware for applications with battery back-up. 24VDC-26.4VDC rated for applications without battery back-up (US applications only). Current rating 2A combined
  • One (1) 19.8VDC-26.4VDC @ 0.8A rated filtered regulated auxiliary output for applications with battery back-up, 24VDC-26.4VDC @ 0.8A rated for applications in US not requiring battery back-up. Not affected by FACP trigger
  • One (1) 12VDC filtered regulated auxiliary output rated 0.5A. Not affected by FACP trigger
  • Two (2) follower Normally Open relay outputs for controlling ADA actuators/accessories rated 28VDC @ 0.5A
  • Two momentary door operator activation relay outputs
  • Trouble relay output indicating low AC voltage trouble and battery trouble

Back-up Battery

• Type - Sealed lead acid or gel type
• Failover
  • Upon AC loss, instantaneous
  • When 7AH batteries are used, battery capacity for emergency stand-by is 30 minutes

Fire Alarm Disconnect

• Normally Closed FACP trigger input
• Programmable Fire Alarm Disconnect options
• Removes power to outputs and disables delayed follower relays
• Connects power to lock outputs and enables delayed follower relays

Indicators (LED)

• AC Power (Green) - Input voltage is present
• Trigger Output (Red) - Panic device status/trouble
• FAI (Green) - FACP disconnect
• Battery (Red) - Low battery

Agency Listings

• UL
  • UL 294 - Access Control Unit Power Supply
• cUL
  • ULC-S319 - Access Control Unit Power Supply. Class 1

Physical and Environmental

• Dimensions (H x W x D)
  • 13.5” x 13” x 3.25” (342.9mm x 330.2mm x 82.6mm)
  • Enclosure accommodates up to two (2) 12VDC/7AH batteries
• Product Weight - 6.25 lbs. (2.83 kg)
• Shipping Weight - 7.15 lbs. (3.24 kg)
• Temperature
  • Operating - -0°C to 49°C (-32°F to 120°F)
  • Storage - -20°C to 70°C (-4°F to 158°F)
• Relative Humidity - 85% +/-5%
• BTU/Hr - 120 BTU/Hr

STRIKEIT4 Specifications PDF

STRIKEIT4 Manual