CNGE1IPS75AC Comnet Industrial 75 W Gigabit Power over Ethernet Midspan Injector Compatible with IEEE802.3at with Power Cord

The ComNet CNGE1IPSXXAC series consists of industrial Power over Ethernet midspan injection modules that inject 50-57 VDC at to any network cable. Operating power and 10/100/1000TX Ethernet data are easily combined on one cable, eliminating the need to install additional power outlets and electrical cabling. The CNGE1IPS95 is fully compliant with the requirements of IEEE 802.3at for Power Sourcing Equipment (PSE), and features auto detection of powered devices (PDs). Transmission distances of up to 328 feet (100 meters) are supported, and this injector supplies operating power for PDs drawing a maximum of 75 and/or 95 watts (model dependent). Ideally suited to fiber optic, wireless, or other networks where it may be difficult to furnish operating power to the PDs, the CNGE1IPSXXAC series offers a true plug-and-play product requiring no user configuration or other set-up.

Specifications

Ethernet Standards

• IEEE802.3 10BASE-T
• IEEE802.3u 100BASE-TX
• IEEE802.3ab 1000BASE-T
• IEEE802.3at PoE+

Connectors

• RJ45 Data In/Out - Data/signal pairs pin (1,2) (3,6) (4,5) (7,8)
• RJ45 Power out - Power over pairs: 3,6(V+), 4,5(V+), 1,2(V-), 7,8(V-)

Power

• Power Consumption - 1 W Max (without PoE Load)
• Input Power Supply - 100-240 VAC Input
• Power Output - 50-57 VDC @ 75 W Max

AC Surge Protection

• Line-Earth 1.2/50μs (8/20μs) - 6 KV
• Line-Line 1.2/50μs (8/20μs) - 4 KV

PoE Surge Protection

• Protected line - 1,2,3,4,5,6,7,8
• Common mode (10/700μs) - 6 KV
• Differential mode (10/700μs) - 1.5 KV

Electrical & Mechanical

• Indicating LEDs - Power, PoE Load
• Enclosure - IP 20 Black powder-coat aluminum
• Installation - Wall mount
• Size 75W - 8.1 × 5.1 × 1.6 in (20..4 × 13.0 × 4.1 cm)
• Shipping Weight 75W - <2 lb / 0.74 kg

Environmental

• MTBF - >500,000 hrs (MIL-HDBK-217F) at 25°C
• Operating Temp - -40 ̊ C to +75 ̊ C
• Storage Temp - -40 ̊ C to +80 ̊ C
• Relative Humidity - 10% to 90% (non-condensing)

Approvals & EMC Compliance

• EMI - FCC Part 15 Subpart B Class A, CE EN 55022 Class A
• Safety - cUL/UL

CNGE1IPS75AC Specifications PDF